Endless ATC Lite
Değerlendirme: 0.00 (Oylar:
0)
Instructions
Select a plane, send it to a lower altitude (about 2000 feet), guide it to the blue ILS line at a large distance from the runway, and clear it for approach by enabling ILS mode, which means the plane will follow the line to the runway (make sure that the plane captures the blue line at a shallow angle).
For each plane you lead to the runway, you gain skill points, and the more skill points, the more planes will enter the airspace. Departing aircraft determine their heading and speed themselves; they only require an instruction to climb to a higher altitude. When you make mistakes, the skill level goes down a bit. Some planes have an additional 'RD' tag; these planes should land on the secondary 'RD' airport. When landing at parallel runways, make sure both planes are 1000 feet vertically separated until both planes are on their localizer.
For more detailed instructions see: https://startgrid.blogspot.com/2013/11/endless-atc-instructions.html
Features
• unlimited amount of planes, multiple runways,
• give radar vectors like a real air traffic controller,
• amount of traffic adapts to your skill level,
• custom traffic and high simulation speed modes,
• automatic save function; resume where you left off,
• realistic plane behavior and pilot voices,
• no internet connection required,
• no ads.
This lite version includes one airport. For more airports, more challenges and realism, check out the full version of Endless ATC.
Kullanıcı DeğerlendirmeleriYorum Ekle ve İncele
Based on 0
Oylar ve 0 Kullanıcı Değerlendirmeleri
Henüz yorum eklenmedi.
SPAM, istismara yönelik, konu dışı, küfür içeren, kişisel saldırı içeren veya herhangi bir türden nefreti teşvik eden yorumlar yayınlanmak üzere onaylanmayacaktır.
Teknoloji Haberleri
Bu Kategorideki Diğer Uygulamalar